It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. The fast and easy to use permanent bonding method provides high strength and long-term durability. (1.0 mm), general purpose acrylic adhesive on both sides of a firm, foam core. I consider playback log vibrations consistently less than 2.0 no matter how hard I push the sticks, with a firmly mounted SK-720 as good as it is reasonably ever going to get.Dream, Design, Deliver with 3M VHB Tape 4910. I am sure that with appropriate lab equipment, a source of funding, and more personal time away from work and family, I could find a better mounting solution, but this the best mounted method I have found so far in keeping the SK-720 firmly mounted while minimizing transmitted and sensed vibrations. With this mounting method, the SK-720 feels firm on its mount, yet vibrations top at 1.8 on the playback log with occasional less than 1 second peaks of 4.71 on the vibration analyzer log for all 3 of my helicopters with SK-720's. By using a double layer of the 3M 4011 between the SK-720 and the metal plate, the SK-720 is stiffly mounted on the metal plate, and the layer is thick enough to prevent the screw from contacting the metal plate.
![best double sided mounting tape home depot best double sided mounting tape home depot](https://www.nationalbookstore.com/17556-thickbox_default/best-buy-double-sided-tape-foam-48mmx5m-small-roll-none.jpg)
I was concerned about the SK-720 bottom mounting screws making contact with the metal plate, and transmit vibrations that way. However, if I taped a single layer of the 3M 4011 over the SK-720 bottom plastic. It is a black or white, 0.045 in (1.1 mm) modified acrylic adhesive with a very conformable, foam core. If I placed the tape over the SK-720 mounting crews, I ran into several issues (leveling, vibrations, etc.). Dream, Design, Deliver with 3M VHB Tape 5952. However, a single layer did not work as well. I originally tried a single continuos layer of thin foam (several kinds and brands) between the SK-720 and the metal plate, but I found that this continuous layer transmitted too much vibration. The picture below is an original mounting method, which I tweaked a little bit before finding a better method. See below.īetween the SK-720 and the metal plate I just use 4 small squares of the 3M 4011 tape. I first stick a bigger piece of the 3M 4011 tape to the 3M 4408, and cut the excess 3M 4011 with a blade, so the 2 tapes are flush. I stick the 3M 4011 on both sides of the 3M 4408 to add stickiness to the 3M 4408. I cut the 3M 4408 into 4 squares of whatever the width of the 3M 4408. You can also find this cheaply at Home Depot, Ace, and Lowe's. I am using the readily available 3M 4011 mounting tape. However, the strap was introducing its own issues. However this tape is not very sticky, so I would not trust it to hold the SK-720 without a strap. The best-rated product in Double sided Floor Tape is the Indoor/Outdoor 3 in. There is only a single place that I have found that sells this tape in sensible quantities. I don't know about other parts of the world, but here in the state most places that sell this foam tape sell it in massive quantities, which can get expensive. 3M Scotch 4011 Best Double-Sided Tape for Exterior Mounting 3M is known for making quality products, and their exterior tape is no different. I am using the 3M 4408 double sticky side foam tape. Interestingly, the mounting method that has worked best for me is actually cheap with readily available materials. Of course, it goes without mentioning that one must optimize the mechanical setup first, and make sure the motor is running true, before beginning the quest of chasing vibrations with the various mounting methods.
![best double sided mounting tape home depot best double sided mounting tape home depot](https://images.thdstatic.com/productImages/f1951ef6-e673-46da-946f-656fef71c618/svn/gray-3m-specialty-anti-slip-tape-414dc-sf-e1_600.jpg)
Zeal tape, Align PU gel, Lynx anti-vibration tape, different and various double sided foams and tapes, etc. However, he mentioned that they would switch to 3M 4408 in the future because most customers live in warmer climates.īelow is a picture of some of the products and materials I have used. He mentioned that they included the grey foam in the kits instead of the better 3M 4408 foam because the 3M 4408 turns hard near or below freezing temperatures. He also suggested doubling the metal plate. He wrote that, during their testing, they achieved the best anti-vibrations results with either gel or black neoprene foam (3M 4408) under the plate and thin foam between the plate and the unit. My goal is to minimize the vibrations sensed by the SK-720, but still have the SK-720 mounted stiffly enough to follow the helicopters, and minimize the SK-720 wobbling on its mounting during sharp stick maneuvers. I even tried the Mr Mel method of tight wrapping with a zip tie over fuel tubing.
![best double sided mounting tape home depot best double sided mounting tape home depot](http://mobileimages.lowes.com/product/converted/075353/075353213551.jpg)
Single layer, double layer, mixed layers. I have tried different and various kinds of tapes, foams, gels.